ZLL
ADNGF-32-75-P-A
delivery time:5-6weeks
-
Stroke5 mm ... 300 mm
-
Piston diameter32 mm
-
Based on normISO 21287
-
CushioningElastic cushioning rings/pads at both ends
Self-adjusting pneumatic end-position cushioning
-
Mounting positionAny
-
Structural designPiston
Piston rod
Profile barrel
-
Position sensingFor proximity sensor
-
VariantsEX protection approval (ATEX)
Through piston rod
Heat-resistant seals max. 120°C
Laser etched rating plate
-
Protection against torsion/guideGuide rod with yoke
-
Operating pressure0.1 MPa ... 1 MPa
-
Operating pressure1 bar ... 10 bar
-
Mode of operationDouble-acting
-
CE marking (see declaration of conformity)as per EU explosion protection directive (ATEX)
-
UKCA marking (see declaration of conformity)acc. to UK EX instructions
-
Explosion prevention and protectionZone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX)
-
ATEX category gasII 2G
-
ATEX category for dustII 2D
-
Type of ignition protection for gasEx h IIC T4 Gb
-
Type of (ignition) protection for dustEx h IIIC T120°C Db
-
Explosive ambient temperature-20°C <= Ta <= +60°C
-
Operating mediumCompressed air as per ISO 8573-1:2010 [7:4:4]
-
Information on operating and pilot mediaOperation with oil lubrication possible (required for further use)
-
Corrosion resistance class (CRC)2 - Moderate corrosion stress
-
LABS (PWIS) conformityVDMA24364-B1/B2-L
-
Ambient temperature-20 °C ... 120 °C
-
Impact energy in the end positions0.4 J
-
Theoretical force at 6 bar, retracting415 N
-
Theoretical force at 6 bar, advancing483 N
-
Moving mass at 0 mm stroke122 g
-
Additional moving mass per 10 mm stroke17 g
-
Basic weight with 0 mm stroke327 g
-
Additional weight per 10 mm stroke38 g
-
Pneumatic connectionG1/8
-
Note on materialsRoHS-compliant
-
Cover materialAluminum
Anodized
-
Seals materialTPE-U(PUR)
-
Piston rod materialHigh-alloy steel
-
Material of cylinder barrelWrought aluminum alloy
Smooth anodized
Tech Support
User Reviews